| 基于ANSYS/LS-DYNA的易拉罐跌落研究 |
| |
| 引用本文： | 张改梅,仵季红,郭福宾. 基于ANSYS/LS-DYNA的易拉罐跌落研究[J]. 包装工程, 2011, 32(5): 4-6 |
| |
| 作者姓名： | 张改梅 仵季红 郭福宾 |
| |
| 作者单位： | 北京印刷学院,北京,102600;北京印刷学院,北京,102600;北京印刷学院,北京,102600 |
| |
| 基金项目： | 北京市委组织部优秀人才项目(09000001); 北京印刷学院校重点资助项目(Ea201002) |
| |
| 摘 要： | 利用ANSYS有限元分析软件,通过对易拉罐不同跌落高度、不同碰撞地面的仿真分析,研究易拉罐在不同的跌落形式下的受力及变形。结果表明:随着跌落高度地增加,接触部位应力分布会扩大,并且应力也会相应地增加;面跌落相对于角跌落,应力会贯穿整个罐壁,并且向上出现不连续的传递,且逐渐减小。
|
| 关 键 词： | 易拉罐 有限元 跌落 碰撞 应力 |
| 收稿时间： | 2010-10-14 |
| 修稿时间： | 2011-03-10 |
Drop Analysis of Pop Can Based on ANSYS/LS-DYNA |
| |
| ZHANG Gai-mei,WU Ji-hong and GUO Fu-bin. Drop Analysis of Pop Can Based on ANSYS/LS-DYNA[J]. Packaging Engineering, 2011, 32(5): 4-6 |
| |
| Authors: | ZHANG Gai-mei WU Ji-hong GUO Fu-bin |
| |
| Affiliation: | ZHANG Gai-mei,WU Ji-hong,GUO Fu-bin(Beijing Institute of Graphic Communication,Beijing 102600,China) |
| |
| Abstract: | Simulation analysis of pop can with different drop height and floors was carried out using ANSYS finite element analysis software.The purpose was to study the force and deformation of pop can under different drop forms.The results showed that the contact stress distribution expands and the stress increases with drop height increase.For the flat drop,the stress of can runs through the whole can wall,discontinuously transmits upwards to the other sections of can and gradually attenuates,with respect of corner... |
| |
| Keywords: | pop can finite element drop impact stress |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《包装工程》浏览原始摘要信息 |
|
点击此处可从《包装工程》下载全文 |
|
