| 全浮动芯棒连轧管机组轧制力测试与研究 |
| |
| 引用本文： | 赵志毅,董凯,余勇,潘峰,赵佳,周晓岚.全浮动芯棒连轧管机组轧制力测试与研究[J].钢管,2006,35(4):1-5. |
| |
| 作者姓名： | 赵志毅 董凯 余勇 潘峰 赵佳 周晓岚 |
| |
| 作者单位： | 1. 北京科技大学,北京,100083
2. 宝山钢铁股份有限公司,上海,201900 |
| |
| 摘 要： | 通过对宝山钢铁股份有限公司全浮动芯棒连轧管机组轧制力的测试,了解了机组的工作状况,并分析了轧制过程中力的变化趋势;采用合适的理论计算公式对各机架的理论轧制力进行了计算,并与实测值进行了对比,尝试建立连轧管过程轧制力预报模型。
|
| 关 键 词： | 全浮动芯棒连轧管机组 轧制力 测试 预报模型 |
| 文章编号： | 1001-2311（2006）04-0001-05 |
| 修稿时间： | 2006-03-09 |
Measurement of and Study on Rolling Forces of Full-floating Mandrel Mill |
| |
| Zhao Zhiyi,Dong Kai,Yu Yong,Pan Feng,Zhao Jia,Zhou Xiaolan.Measurement of and Study on Rolling Forces of Full-floating Mandrel Mill[J].Steel Pipe,2006,35(4):1-5. |
| |
| Authors: | Zhao Zhiyi Dong Kai Yu Yong Pan Feng Zhao Jia Zhou Xiaolan |
| |
| Abstract: | The operation status of the full-floating mandrel pipe mill of Baoshan I & S Co.,Ltd.is investigat-ed by means of measuring the mill's rolling forces.The rolling force variation of the mill during the rolling pro-cess is analyzed.The theoretic rolling force of each individual roll stand of the mill is calculated with proper for-mula for theoretic calculation,and the calculated values are compared with relevant actual measured values in a bid to build up a model to forecast the rolling force of the mandrel mill process. |
| |
| Keywords: | Full-floating mandrel pipe mill Rolling forces Measurement Model for forecasting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
