| 基于有限元方法的不同长径比柔轮受力分析研究 |
| |
| 引用本文： | 刘振峰,田宇,郭学东. 基于有限元方法的不同长径比柔轮受力分析研究[J]. 装备制造技术, 2010, 0(1): 30-32 |
| |
| 作者姓名： | 刘振峰 田宇 郭学东 |
| |
| 作者单位： | 1. 上海交通大学,机械与动力工程学院,上海,200240
2. 宁夏大学,机械工程学院,宁夏,银川,750021 |
| |
| 摘 要： | 通过UGNX5.0建立不同长径比柔轮和波发生器的三维实体模型,并用parasolid格式导入ANSYS。采用SOLID185六面体单元用sweep方式对柔轮进行网格化,建立有限元模型。在波发生器外柱面与柔轮内柱面之间建立两对面-面接触,更真实地模拟出柔轮的边界条件,然后在波发生器长轴方向对称位置的两个轮齿的节点上施加等效于扭矩的切向力,从而研究出柔轮的应力分布和变形与长径比的关系。
|
| 关 键 词： | 谐波传动 柔轮 有限元 接触 |
FE Analysis of Flexspline with Different Length-to-Diameter-ratio |
| |
| LIU Zhen-feng,TIAN Yu,GUO Xue-dong. FE Analysis of Flexspline with Different Length-to-Diameter-ratio[J]. , 2010, 0(1): 30-32 |
| |
| Authors: | LIU Zhen-feng TIAN Yu GUO Xue-dong |
| |
| Affiliation: | 1.School of Mechanical Engineering;Shanghai Jiaotong University;Shanghai 200240;China;2.School of Mechanical Engineering of Ningxia University;Yinchuan 750021;China |
| |
| Abstract: | Builded 3-D total solid models of Flexspline with different length-to-diameter ratio and Wavegenerator with UGNX5.0,exported to ANSYS in parasolid format,and meshed Flexspline with Element SOLID185 in a Sweep way to create its finite model.Created two pairs of surface contact between inner cylindrical surface of teeth ring of Flexspline and outer cylindrical surface of Wavegenerator to simulate boundary conditions of Flexspline,applied a pair of tangent forces on nodes of teeth located on Y axis to simulate... |
| |
| Keywords: | harmonic drive flexspline ANSYS contact |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
