| 基于DSP的MIG焊接弧长模糊控制系统研究 |
| |
| 引用本文： | 于超林,胡绳荪,宋东风,殷凤良.基于DSP的MIG焊接弧长模糊控制系统研究[J].电焊机,2007,37(1):46-49. |
| |
| 作者姓名： | 于超林 胡绳荪 宋东风 殷凤良 |
| |
| 作者单位： | 天津大学,材料科学与工程学院,天津,300072;天津大学,材料科学与工程学院,天津,300072;天津大学,材料科学与工程学院,天津,300072;天津大学,材料科学与工程学院,天津,300072 |
| |
| 摘 要： | 基于DSP控制的MIG焊接系统,采用缓降弧焊电源外特性和变速送丝的控制方法以达到保证弧长不变的目的,并将模糊控制引入到变速送丝控制设计中.阐述了利用MATLAB的模糊逻辑工具箱进行模糊控制规则设计,并利用Simulink工具箱中的仿真工具对所设计的控制方法进行仿真.实验研究表明,应用该软件设计的控制方法与传统PID控制相比,可快速、准确地控制焊接弧长的稳定.
|
| 关 键 词： | DSP 模糊控制 变速送丝 MATLAB PID |
| 文章编号： | 1001-2303(2007)01-0046-04 |
| 修稿时间： | 2006-05-08 |
Study on system of arc length fuzzy control on MIG welding based on DSP |
| |
| YU Chao-lin,HU Sheng-sun,SONG Dong-feng,YIN Feng-liang.Study on system of arc length fuzzy control on MIG welding based on DSP[J].Electric Welding Machine,2007,37(1):46-49. |
| |
| Authors: | YU Chao-lin HU Sheng-sun SONG Dong-feng YIN Feng-liang |
| |
| Affiliation: | School of Materials Science and Engineering, Tianjin University,Tianjin 300072, China |
| |
| Abstract: | Based on the MIG welding system controlled by DSP,A combinational controlling method that was of alternate wire-feed control cooperating with the slow negative characteristic power source was adopted to study to keep the length of arc unvaried.And the fuzzy control was introduced into the design of alternate wire-feed control.How to design the fuzzy control for this method by taking use of the toolbox in MATLAB was formulated in this paper.And through the simulation tool in Simulink toolhox,simulation was given for this control method. Study shows that this control method designed by MATLAB was faster and preciser on controlling are length stabilization compared with the conventional PID control method. |
| |
| Keywords: | DSP fuzzy control alternate wire-feed MATLAB PID |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
