A new bistable laser diode configuration for all optical switching

A new bistable laser diode configuration for all optical switching has been suggested and its equivalent circuit model is developed. For switching the device to the high state (set) a TE mode optical pulse is required, which is the oscillating mode of the laser, whereas a TM mode pulse is used to bring the output to a low state (reset). But the wavelength of the set and reset pulses are the same as that of the lasing wavelength of the device. The static and dynamic characteristics are studied by simulating the equivalent circuit model using the circuit simulation program PSPICE. It is found that as the carrier lifetime τ_a of the absorption section increases, the width of the optical pulse required for reset increases nonlinearly. The rise and fall times are found to be 0.15 and 0.16 ns, respectively, for a τ _a, of 3 ns