| 多层压配组合冷挤压凹模和高压容器的优化设计 |
| |
| 引用本文： | 王祖唐.多层压配组合冷挤压凹模和高压容器的优化设计[J].机械工程学报,1981,17(1):1-13. |
| |
| 作者姓名： | 王祖唐 |
| |
| 作者单位： | 清华大学 |
| |
| 摘 要： | 本文对多层压配冷挤压凹模和高压容器的应力和应变以及优化设计的原理进行了系统的论述。优化条件分为：（一）内圈内壁在工作内压作用下允许出现拉应力和（二）内圈内壁在工作内压作用下不出现拉应力两种情况。文章提出根据所选材料和工作内压来确定各层组合圈壁厚和过盈量的计算公式。
|
Opfimum Design of MuHi-layer Composite Cylinder of Cold Extrusion Dies and High Pressure Containers |
| |
| Wang Zutong.Opfimum Design of MuHi-layer Composite Cylinder of Cold Extrusion Dies and High Pressure Containers[J].Chinese Journal of Mechanical Engineering,1981,17(1):1-13. |
| |
| Authors: | Wang Zutong |
| |
| Affiliation: | Tsing Hua University |
| |
| Abstract: | Method of optimum design of multi-layer composite cylinder of cold extrusion dies and high pressure containers has been developed. Optimum design refers to two cases: (1) tensile hoop stress on inner face core under working pressure allowable and (2) without tensile hoop stress. Eguations calculating layer thickness and diametrial interfernce are derived. |
| |
| Keywords: | |
|
| 点击此处可从《机械工程学报》浏览原始摘要信息 |
|
点击此处可从《机械工程学报》下载全文 |
