Hydroisomerization of n-hexane and n-heptane over platinum-promoted Cs2.5H0.5PW12O40 (Cs2.5) studied in comparison with several other solid acids

Isomerization of n-hexane and n-heptane was carried out over Cs_2.5H_0.5PW₁₂O₄₀ (denoted by Cs2.5) promoted by Pt which was introduced by either impregnation of H₂PtCl₆ or mechanical mixing of Pt/Al₂O₃ and over non-promoted Cs_2.5H_0.5PW₁₂O₄₀ in the presence of hydrogen at atmospheric pressure. The reaction temperature studied was relatively low (typically 453 and 423 K for n-hexane and n-heptane, respectively) and the hydrogen pressure was also rather low (standard conditions: feed = n-alkane 0.05 atm, H₂ 0.20 atm, N₂ balance; W/F = 40 g h mol⁻¹). Results were compared with those obtained under the same conditions for other Pt-promoted solid acids, where particular attention was paid to the time courses of the reaction (initial vs. stationary performance). Both the activity and selectivity of Cs2.5 at the initial stage (after 5 min) increased by the addition of the Pt component. Pressure dependencies of the rate at the initial stage were approximately first and −0.5th orders in alkane and hydrogen, respectively. Most remarkable was the suppression of the deactivation during the reaction in the presence of both Pt and hydrogen. For example, the mechanical mixture of Pt/Al₂O₃ and Cs2.5 (abbreviated as Pt+Cs2.5) showed little deactivation and much improved selectivity; resulting in high stationary conversion and selectivity; e.g., 98.4 and 92.1% selectivities for n-hexane and n-heptane at the conversions of 58.6 and 39.4%, respectively. Most of the results were well explained by a classical bifunctional mechanism, although other mechanisms are not all excluded. As for the other solid acids, the initial activity of Pt-promoted SO₄/ZrO₂ was high, but decreased rapidly. The deactivation was small with Pt-promoted H-ZSM-5, but the activity was low. The stationary yields of isomerized products were higher for Pt-promoted beta zeolite and Al-pillared saponite (tested only for n-heptane), although higher reaction temperatures were necessary. This revised version was published online in August 2006 with corrections to the Cover Date.