| 装配线上针管工位PLC控制系统的设计与实现 |
| |
| 引用本文： | 丁学恭,黄杭美.装配线上针管工位PLC控制系统的设计与实现[J].机械工程与自动化,2006(6):97-99,102. |
| |
| 作者姓名： | 丁学恭 黄杭美 |
| |
| 作者单位： | 杭州职业技术学院,浙江,杭州,310018 |
| |
| 摘 要： | 上针管工位是自动化注射针装配线上的一个重要工位．影响上针管工位针管装配质量的重要因素在于上针、合模、刮针动作的协调一致程度，为此，对该工位进行了控制系统的改进设计。特别是在程序设计中，通过时间参数的设置，改善了机械位移动态特性对控制系统的影响。
|
| 关 键 词： | 上针管工位 设计 |
| 文章编号： | 1672-6413（2006）06-0097-03 |
| 收稿时间： | 2006-06-20 |
| 修稿时间： | 2006-06-20 |
Improvement on Control System of Working Procedure of Winding the Needle Tube Based on PLC |
| |
| DING Xue-gong,HUANG Hang-mei.Improvement on Control System of Working Procedure of Winding the Needle Tube Based on PLC[J].Mechanical Engineering & Automation,2006(6):97-99,102. |
| |
| Authors: | DING Xue-gong HUANG Hang-mei |
| |
| Affiliation: | Hangzhou Vocational and Technical College,Hangzhou 310018,China |
| |
| Abstract: | Winding the needle tube is an important working procedure in the automatic injector assembly line. The major factor affecting the injector assembly quality is coordination of winding needle, merging mould and scraping needle. Based on the coordination of winding needle ,merging mould and scraping needle ,this paper improves the design of the control system. Through the setup of the time parameter,the effects of the movement of the machinery on the control system are improved. |
| |
| Keywords: | PLC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
