Improved thermoelectric performance of highly-oriented nanocrystalline bismuth antimony telluride thin films

Improved thermoelectric performance of highly-oriented nanocrystalline bismuth antimony telluride thin films is described. The thin films are deposited by a flash evaporation method, followed by annealing in hydrogen. By optimizing the annealing conditions, the resulting thin films exhibit almost perfect orientation with the c-axis normal to the substrate, and are composed of nano-sized grains with an average grain size of 150 nm. The in-plane electrical conductivity and Seebeck coefficient were measured at room temperature. The cross-plane thermal conductivity of the thin films was measured by a 3ω method, and the in-plane thermal conductivity was evaluated by using an anisotropic factor of thermal conductivity based on a single crystal bulk alloy with almost the same composition and carrier concentration. The measured cross-plane thermal conductivity is 0.56 W/(m K), and the in-plane thermal conductivity is evaluated to be 1.05 W/(m K). Finally, the in-plane power factor and figure-of-merit, ZT, of the thin films are 35.6 μW/(cm K²) and 1.0 at 300 K, respectively.