Closed-form solution for wedge cutting force through thin metal sheets

A simple kinematic model is developed which describes the main features of the process of the cutting of a plate by a rigid wedge. It is assumed in this model that the plate material curls up into two inclined cylinders as the wedge advances into the plate. This results in membrane stretching up to fracture of the material near the wedge tip, while the “flaps” in the wake of the cut undergo cylindrical bending. Self-consistent, single-term formulas for the indentation force and the energy absorption are arrived at by relating the “far-field” and “near-tip” deformation events through a single geometric parameter, the instantaneous rolling radius. Further analysis of this solution reveals a weak dependence on the wedge angle and a strong dependence on friction coefficient. The final equation for the approximate cutting force over a range of wedge semiangles 10° ≤ θ ≤ 30° and friction coefficients 0.1 ≤ μ ≤ 0.4 is: F = 3.28σ₀(δ_t)^0.2l^0.4t^1.6μ^0.4, which is identical in form and characteristics to the empirical results recently reported by Lu and Calladine Int. J. Mech. Sci.32, 295–313 (1990)].This analysis is believed to resolve a controversy recently developed in the literature over the interpretation of plate cutting experiments.