首页 | 本学科首页   官方微博 | 高级检索  
     

G 波段带状注速调管电子光学系统的初步设计
引用本文:杨修东,阮存军,王树忠,张长青.G 波段带状注速调管电子光学系统的初步设计[J].微波学报,2014,30(S2):384-386.
作者姓名:杨修东  阮存军  王树忠  张长青
作者单位:(中国科学院高功率微波源与技术重点实验室,北京 100190)
基金项目:国家自然科学基金(61172015,61222110, 60971073)
摘    要:设计了G 波段带状注速调管电子光学系统,主要工作参数为:电子注电压16.5kV,电流0.58A。电子注通道截 面3.272mmx0.274mm,通道长度20mm。阴极面是曲率半径为5mm 的矩形柱面,尺寸为2.5mm×1.2mm,电子注在单一 方向上压缩,电子注束腰截面尺寸2.5mm×0.12mm,电子枪压缩比10:1。采用均匀场聚焦方式,模拟了三种磁场强度下 的电子注成形和传输过程。模拟结果显示,电子注传输的Diocotron 不稳定现象在强磁场下得到改善;磁场强度为8700Gs 时的传输通过率为100%。

关 键 词:G  波段  带状注  速调管  电子光学

Preliminary Design of an Electron Optics System for G-Band Sheet Beam Klystron
YANG Xiu-dong,RUAN Cun-jun,WANG Shu-zhong,ZHANG Chang-qing.Preliminary Design of an Electron Optics System for G-Band Sheet Beam Klystron[J].Journal of Microwaves,2014,30(S2):384-386.
Authors:YANG Xiu-dong  RUAN Cun-jun  WANG Shu-zhong  ZHANG Chang-qing
Affiliation:(Key Laboratory of High Power Microwave Sources and Technologies, Institute of Electronics, Chinese Academy of Sciences, Beijing 100190, China )
Abstract:A sheet beam electron optics system for G-band sheet beam klystron was designed and analyzed. The voltage and current of the beam is 16.5 kV and 0.58 A respectively. The electron beam with a rectangle cross section of 2.5mm × 0.15mm is focused by uniform solenoidal magnetic field. In this paper, the transport process of the electron beam is simulated. Simulation results show that the electron beam transmission attained 100% over 15mm in distance.
Keywords:electron optics system  G-Band  sheet beam  klystron
点击此处可从《微波学报》浏览原始摘要信息
点击此处可从《微波学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号