首页 | 本学科首页   官方微博 | 高级检索  
     

等离子体浸没离子注入改善45钢的摩擦学性能
引用本文:刘洪喜,汤宝寅,王浪平,王小峰,于永澔,孙韬.等离子体浸没离子注入改善45钢的摩擦学性能[J].材料热处理学报,2004,25(6):83-86.
作者姓名:刘洪喜  汤宝寅  王浪平  王小峰  于永澔  孙韬
作者单位:哈尔滨工业大学现代焊接生产技术国家重点实验室,黑龙江,哈尔滨,150001
基金项目:国防预研基金资助项目 (No .70 0 1 0 2 8)
摘    要:采用灯丝放电和射频(RF)辉光放电等离子体浸没离子注入(PⅢ)工艺对45钢表面进行了氮离子注入强化处理。通过X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、显微硬度、针-盘磨损和电化学腐蚀试验等测试手段,分析比较了经灯丝放电PⅢ和RF辉光放电PⅢ改性后试样表面元素的浓度分布、显微硬度、摩擦磨损性能和耐腐蚀性能。结果表明:不同条件下的氮离子注入均能提高45钢表面的显微硬度、耐磨性和抗腐蚀性能;且RF辉光放电PⅢ处理后试样的显微硬度提高了76.8%,摩擦系数下降到0.3,与灯丝放电PⅢ处理后的试样相比,其表面强化效果更加明显。

关 键 词:等离子体浸没离子注入(PⅢ)  45钢  摩擦磨损性能  耐腐蚀性
文章编号:1009-6264(2004)06-0083-04

Improvement Tribological Properties of 45 Steel by Plasma Immersion Ion Implantation
LIU Hongxi,TANG Baoyin,WANG Langping,WANG Xiaofeng,YU Yonghao,SUN Tao.Improvement Tribological Properties of 45 Steel by Plasma Immersion Ion Implantation[J].Transactions of Materials and Heat Treatment,2004,25(6):83-86.
Authors:LIU Hongxi  TANG Baoyin  WANG Langping  WANG Xiaofeng  YU Yonghao  SUN Tao
Abstract:Surface modification of 45 steel was investigated by hot filament gas discharge and radio-frequency (RF) glow discharge nitrogen plasma immersion ion implantation (PIII) techniques. The chemical composition and microstructure of the modified layer were characterized by X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy(SEM), respectively. The microhardness, friction and wear behavior, corrosion resistance were also evaluated. The results reveal that the surface properties of 45 steel are enhanced by the two kinds of PIII,however,the RF glow discharge PIII produces the improvement of the surface properties more markedly. The microhardness increases by 76 8%, friction coefficient decreases to 0 3, and the corrosion resistance of the samples treated by RF glow discharge PIII is improved significantly.
Keywords:Plasma Immersion Ion Implantation (PIII)  45 carbon steel  friction and wear behavior  corrosion resistance  microhardness
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号