| 双向支撑超声波悬浮轴承的设计 |
| |
| 引用本文： | 田丰君,车小红,杨志刚,姜斌,姚雪峰. 双向支撑超声波悬浮轴承的设计[J]. 光学精密工程, 2009, 17(4) |
| |
| 作者姓名： | 田丰君 车小红 杨志刚 姜斌 姚雪峰 |
| |
| 作者单位： | 吉林大学,机械科学与工程学院,吉林,长春,130025;吉林大学,机械科学与工程学院,吉林,长春,130025;吉林大学,机械科学与工程学院,吉林,长春,130025;吉林大学,机械科学与工程学院,吉林,长春,130025;吉林大学,机械科学与工程学院,吉林,长春,130025 |
| |
| 摘 要： | 设计并给出了一种对轴径向和轴向同时进行支撑的超声波轴承结构,并测试了轴的最大转速.分析了轴承表面超声辐射压力的形成以及超声波轴承的工作原理,在此基础上设计了双向支撑超声波轴承机构,测试了不同悬浮间隙下轴的最大转速.实验结果表明:在轴重85.5 g、悬浮间隙为8.53μm时,轴最高转速达到了8 946 r/min;说明双向支撑超声波轴承结构可以实现对轴的悬浮支撑,且悬浮间隙越小,轴承对轴的支撑刚度越大,轴的工作稳定性越好,转速越高.
|
| 关 键 词： | 压电换能器 轴承 双向支撑 悬浮 间隙 |
Structure design of bidirectional support ultrasonic levitation bearing |
| |
| TIAN Feng-jun,CHE Xiao-hong,YANG Zhi-gang,JIANG Bin,YAO Xue-feng. Structure design of bidirectional support ultrasonic levitation bearing[J]. Optics and Precision Engineering, 2009, 17(4) |
| |
| Authors: | TIAN Feng-jun CHE Xiao-hong YANG Zhi-gang JIANG Bin YAO Xue-feng |
| |
| Affiliation: | College of Mechanical Science and Engineering;Jilin University;Changchun 130025;China |
| |
| Abstract: | In order to research the levitation capability of a ultrasonic bearing,a bidirectional ultrasonic bearing which levitates and supports a shaft in axial and radial directions respectively was introduced,and the max rotation speed of the shaft was measured.The generation mechanism of the ultrasonic radiation pressure from this kind of bearing and the working principle of the ultrasonic bearing were analyzed,then,a bidirectional support ultrasonic bearing was designed,and the max rotation speeds of the shaft w... |
| |
| Keywords: | piezoelectric transducer bearing support in two directions levitation clearance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
