首页 | 本学科首页   官方微博 | 高级检索  
     

内啮合锥齿轮传动的齿廓重叠干涉分析
引用本文:杨乃积,王小林,贾春华. 内啮合锥齿轮传动的齿廓重叠干涉分析[J]. 焦作工学院学报, 1995, 0(4)
作者姓名:杨乃积  王小林  贾春华
作者单位:焦作工学院机械工程系,焦作市机床厂
摘    要:内啮合锥齿轮传动同内啮合圆柱齿轮传动一样,都存在类似的曲率干涉和运动干涉现象。齿廓重叠干涉就是其中之一。但是,由于内啮合锥齿轮副的齿廓重叠干涉公式非常复杂,实际使用时计算量很大。为此本文首次采用多种简化方法,提出了一个简单实用、计算精度高的齿廓重叠干涉判别式,使用效果颇佳。

关 键 词:锥齿轮副,内啮合,干涉

Analysls of Tooth-overltpping Interference in internal Bevel Gearing Pair
/Yang Naiji et al//. Analysls of Tooth-overltpping Interference in internal Bevel Gearing Pair[J]. Journal of Jiaozuo Institute of Technology(Natural Science), 1995, 0(4)
Authors:/Yang Naiji et al//
Affiliation:Jiaozuo Institue of Technoiogy
Abstract:Like in internal cylindrical gears there are phenomena of curvature interference and kinematic interference in internal bevel gears.The tooth-overlapping interference is one of the hard job examples.But the calculation is practically a very because of the complicacy of tooth-overlapping interference formulas.For this reason,many simplified methods are used,and a new disciminant of tooth-overlapping interference is presented in this paper.The formulas has been proved by application to be simple,practical and accurate in calculation
Keywords:internal bevel gear  interference  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号