首页 | 本学科首页   官方微博 | 高级检索  
     

超声振动辅助气中放电加工的研究
引用本文:张建华,张勤河,孟艳华,徐明刚,任升峰.超声振动辅助气中放电加工的研究[J].电加工与模具,2004(4):13-16.
作者姓名:张建华  张勤河  孟艳华  徐明刚  任升峰
作者单位:山东大学机械工程学院,山东济南,250061
基金项目:山东省自然科学基金资助项目(Y2001F14),教育部高等学校博士学科点专项基金资助项目(20030422014)
摘    要:介绍了超声振动辅助气中放电加工技术,试验研究了电压、脉冲宽度、峰值电流、超声振幅及气体介质压力等参数对加工效率、工件表面粗糙度及电极损耗的影响,并对试验结果进行了分析。

关 键 词:放电加工技术  电极损耗  超声振动  工件表面  加工效率  粗糙度  峰值电流  气体介质  研究  脉冲宽度
修稿时间:2004年3月29日

Study on the ultrasonic vibration assisted EDM with compressed air medium
Zhang Jianhua,et al..Study on the ultrasonic vibration assisted EDM with compressed air medium[J].Electromachining & Mould,2004(4):13-16.
Authors:Zhang Jianhua  
Abstract:The new technology of ultrasonic vibration assisted EDM with compressed air medium is presented simply. Experiments were conducted to investigate the effects of working parameters, including pulse voltage, pulse duration, peak discharge current, ultrasonic vibration amplitude, compressed air pressure, on the material removal rate, workpiece surface roughness, and the tool electrode wear ratio. The experimental results are useful for the application of this new technology.
Keywords:ultrasonic vibration  EDM  compressed air medium
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号