| 浪形保持架特殊铆合模的设计及工艺改进 |
| |
| 引用本文： | 孙福利,阴红.浪形保持架特殊铆合模的设计及工艺改进[J].哈尔滨轴承,2011,32(2):19-19,30. |
| |
| 作者姓名： | 孙福利 阴红 |
| |
| 作者单位： | 哈尔滨轴承集团公司 工模装制造分公司,黑龙江 哈尔滨,150036 |
| |
| 摘 要： | 针对浪形保持架54等分铆合模等分球窝无法加工的问题,增加了工艺孔,减少了不必要模具的制造,节约了成本,缩短了生产周期。
|
| 关 键 词： | 保持架 铆合模 工艺改进 模具 |
Design and process improvement of wave-type cage special riveting die |
| |
| Sun Fuli,Yin Hong.Design and process improvement of wave-type cage special riveting die[J].JOurnal of Harbin Bearing,2011,32(2):19-19,30. |
| |
| Authors: | Sun Fuli Yin Hong |
| |
| Affiliation: | (Tool-die and Equipment Sub-company,Harbin Bearing Group Corporation,Harbin 150036,China) |
| |
| Abstract: | Because equally spaced ball pocket of wave-type cage 54 equally spaced riveting die could not be processed,the processing hole was increased,then unnecessary die manufacture was reduced,the cost was saved,the production cycle was shortened. |
| |
| Keywords: | cage riveting die process improvement die |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
