基于FPGA的多通路SRIO数据传输设计

为满足航天遥测系统中多路高速数据可靠传输的需求，文中提出了一种基于FPGA控制器和Serial RapidIO(SRIO)协议的四通路数据传输设计方案。设计使用Xilinx A7系列FPGA，并使用四个其内部集成的SRIO IP核，设计内部逻辑，实现四路SRIO高速数据传输；使用其内部集成的吉比特收发器（GTP）以满足SRIO传输协议物理层要求。硬件电路使用四个高速收发光模块完成光电转换；并使用高质量时钟芯片产生125MHz的差分时钟信号作为SRIO IP核的参考时钟。经测试验证四路数据传输速率可达440MB/s，且无丢帧、误码现象，该设计已成功运用于遥测系统某地面测试台项目，可实现四路高速数据稳定传输。

A design of multi-channel data transmission with SRIO protocol based on FPGA

In order to meet the requirement of reliable multi-channel high-speed data transmission in space telemetry system, a four-channel data transmission design based on FPGA controller and Serial RapidIO(SRIO) protocol is proposed. Xilinx A7 series FPGA is used in the design, and four SRIO IP cores are used to design the internal logic and realize the high-speed data transmission of four-way SRIO. Use its internal integrated Gigabit transceiver (GTP) to meet the SRIO transport protocol physical layer requirements. The hardware circuit uses four high-speed receiving and luminous modules to complete the photoelectric conversion; A high quality clock chip is used to generate 125MHz differential clock signal as the reference clock of the SRIO IP core. The data transmission rate of four channels can reach 440MB/s without frame loss and error. The design has been successfully applied to a ground test platform project of telemetry system, which can realize stable transmission of four channels high-speed data.