首页 | 本学科首页   官方微博 | 高级检索  
     

等宽T型方管节点静力工作性能与设计
引用本文:武振宇,张耀春.等宽T型方管节点静力工作性能与设计[J].土木工程学报,2004,37(4):23-28.
作者姓名:武振宇  张耀春
作者单位:哈尔滨工业大学土木工程学院
基金项目:国家自然科学基金资助项目 (50 1 0 80 0 6),黑龙江省博士后科研启动金资助项目
摘    要:采用非线性有限元分析方法研究了等宽T型方管节点的破坏模式 ,各几何参数及弦杆所受轴压荷载对节点性能的影响。将新修订的《钢结构设计规范》 (GB5 0 0 17-2 0 0 3 )中等宽T型方管节点的设计公式与国外普遍采用的设计公式、有限元计算结果及实验结果进行了比较。结果表明 ,我国钢结构设计规范给出的设计公式是合理可行的。

关 键 词:方钢管节点  静力性能  非线性有限元方法  设计公式
文章编号:1000-131X(2004)04-0023-06
修稿时间:2002年8月14日

STATIC BEHAVIOR AND DESIGN OF FULL-WIDTH T-TYPE RHS JOINTS
Wu Zhenyu,Zhang Yaochun.STATIC BEHAVIOR AND DESIGN OF FULL-WIDTH T-TYPE RHS JOINTS[J].China Civil Engineering Journal,2004,37(4):23-28.
Authors:Wu Zhenyu  Zhang Yaochun
Affiliation:Harbin Institute of Technology
Abstract:The failure modes of full-width T-type RHS joints subject to static loading and the influences of geometrical parameters and load on the chord on their behaviors are studied by use of nonlinear finite element method in this paper. The design formula of full-width T-type RHS joints adopted by the new design specification of steel structures (GB50017-2003) is compared with the experimental data, the design formula used widely in foreign countries and the calculating results of nonlinear finite element. The results show that the design formula proposed by the design specification of steel structures in our country is reasonable and viable.
Keywords:RHS-joints  static behavior  nonlinear finite element method  design formula
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号