首页 | 本学科首页   官方微博 | 高级检索  
     

对蛇形流道结构的DMFC中气泡段特性研究
引用本文:陈海伦,孟庆然,王文东,康博,陈利强,田爱华. 对蛇形流道结构的DMFC中气泡段特性研究[J]. 吉林化工学院学报, 2021, 38(1): 33-37. DOI: 10.16039/j.cnki.cn22-1249.2021.01.007
作者姓名:陈海伦  孟庆然  王文东  康博  陈利强  田爱华
作者单位:1吉林化工学院 机电工程学院,吉林市,132022;2吉林梦溪工程管理有限公司,吉林市,132001
基金项目:吉林化工学院科学技术研究项目(
摘    要:为了研究微型直接甲醇燃料电池流道的横截面积对气泡流动的影响,采用FLUENT中的VOF方法对蛇形流道进行研究,假设深度变化范围在0.2~0.6 mm之间,跨度为0.2 mm;台肩宽度变化范围在0.2~0.5 mm之间,跨度为0.05 mm.在模拟的过程中,假设流动方式为层流、均为不可压缩流体,忽略重力.研究结果表明:随...

关 键 词:VOF  蛇形流道  压力

Study on the Characteristics of Bubble Zone in DMFC with Serpentine Structure Channel
CHEN Hailun,MENG Qingran,WANG Wendong,KANG Bo,CHEN Liqiang,TIAN Aihua. Study on the Characteristics of Bubble Zone in DMFC with Serpentine Structure Channel[J]. Journal of Jilin Institute of Chemical Technology, 2021, 38(1): 33-37. DOI: 10.16039/j.cnki.cn22-1249.2021.01.007
Authors:CHEN Hailun  MENG Qingran  WANG Wendong  KANG Bo  CHEN Liqiang  TIAN Aihua
Abstract:In order to study the influence of cross-sectional area of micro Direct methanol fuel cell on bubble flow, the VOF method in FLUENT was used to study the serpentine channel. The range of depth was 0.2 mm, 0.4 mm, 0.6 mm The width range is 0.2 mm, 0.25 mm, 0.3 mm, 0.35 mm, 0.4 mm, 0.45 mm, 0.5 mm. Assume that the flow pattern is Laminar, all Incompressible flow, and ignore gravity. The results show that the pressure drop at the inlet and outlet of the snake-shaped runner increases with the decrease of the runner depth When the width of the shoulder is 0.75 ~ 1 times of the width of the runner, the discharge time of the bubble section is shorter and the pressure drop of the inlet and outlet is larger.
Keywords:VOF  Serpentine Runner  Pressure  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《吉林化工学院学报》浏览原始摘要信息
点击此处可从《吉林化工学院学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号