| 镐型截齿温度场数值模拟与试验研究 |
| |
| 引用本文： | 赵敏娜,闫献国,陈峙,张海东,高源,黄尧. 镐型截齿温度场数值模拟与试验研究[J]. 低温工程, 2020, 0(2): 16-21 |
| |
| 作者姓名： | 赵敏娜 闫献国 陈峙 张海东 高源 黄尧 |
| |
| 作者单位： | 太原科技大学机械工程学院 |
| |
| 基金项目： | 国家自然科学基金(51675363);山西省研究生创新项目(2019SY472)。 |
| |
| 摘 要： | 以镐型截齿及其深冷处理环境为研究对象,基于Solidworks软件建立截齿的三维几何模型,基于ANSYS Fluent软件建立了镐型截齿深冷处理温度场数值模型。完成了某型截齿的温度场数值模拟,为验证该模型的合理性,完成了镐型截齿的深冷处理试验,通过截齿温度场模拟数据与试验数据对比,得出数值模拟温度与试验温度下降趋势一致,且时间相差8 min左右,表明镐型截齿温度场数值模拟具有一定的可行性。
|
| 关 键 词： | 镐型截齿深冷处理 ANSYS FLUENT 温度场 数值模拟 |
Numerical simulation and experimental study of temperature field of conical pick |
| |
| Zhao Minna,Yan Xianguo,Chen Zhi,Zhang Haidong,Gao Yuan,Huang Yao. Numerical simulation and experimental study of temperature field of conical pick[J]. Cryogenics, 2020, 0(2): 16-21 |
| |
| Authors: | Zhao Minna Yan Xianguo Chen Zhi Zhang Haidong Gao Yuan Huang Yao |
| |
| Affiliation: | (School of Mechanic Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China) |
| |
| Abstract: | 3D model of conical pick and cryogenic chamber was established based on Solidworks software,and temperature field numerical model for conical pick cryogenic treatment was established using ANSYS Fluent software.The numerical simulation of temperature field for a conical pick was made at-80℃,-120℃,-160℃and-196℃.Conical pick cryogenic treatment experiment was carried out to verify the rationality of the models.Comparing conical pick temperature field simulation data with the experimental data,it is found that the numerical simulation temperature decline is consistent with the experimental result,and the time difference is about 8 min.It indicates that the numerical simulation of conical pick temperature field has certain feasibility. |
| |
| Keywords: | conical pick cryogenic treatment ANSYS Fluent temperature field numerical simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
