Generation of biotin/avidin/enzyme nanostructures with maskless photolithography

Micrometer-sized domains of a carbon surface are modified to allow derivatization to attach redox enzymes with biotin/avidin technology. These sites are spatially segregated from and directly adjacent to electron transfer sites on the same electrode surface. The distance between these electron transfer sites and enzyme-loaded domains must be kept to a minimum (e.g., less than 5 microns) to maintain the fast response time and high sensitivity required for the measurement of neurotransmitter dynamics. This is accomplished through the use of photolithographic attachment of photobiotin using an interference pattern from a UV laser generated at the electrode surface. This will allow the construction of microscopic arrays of active enzyme sites on a carbon fiber substrate while leaving other sites underivatized to facilitate electron transfer reactions of redox mediators, thus maximizing enzyme activity and detection of the enzyme mediator. The ultimate sensitivity of these sensors will be realized only through careful characterization of the carbon electrode surface with respect to its chemical structure and electron transfer properties following each step of the enzyme immobilization process. The characterization of specific modifications of micrometer regions of the carbon surface requires analytical methodology that has both high spatial resolution and sensitivity. We have used fluorescence microscopy with a cooled CCD imaging system to visualize the spatial distribution of enzyme immobilization sites (indicated by fluorescence from Texas Red-labeled avidin) across the carbon surface. The viability of the enzyme attached to the surface in this manner was demonstrated by imaging the distribution of an insoluble, fluorescent product. An atomic force microscope was used to obtain high-resolution images that probe the heterogeneity of the enzyme sites.