| 摩托车手把前罩注射模设计 |
| |
| 引用本文： | 张国祥,赖小强.摩托车手把前罩注射模设计[J].模具制造,2014(6):48-50. |
| |
| 作者姓名： | 张国祥 赖小强 |
| |
| 作者单位： | 滨海模塑集团有限公司,浙江台州318020 |
| |
| 摘 要： | 针对摩托车手把前罩,分析了该塑件结构及工艺要求,详细介绍了该塑件的注射模分型方案设计、模具结构设计、浇注系统设计,可为类似塑件的注射模设计提供参考。
|
| 关 键 词： | 摩托车手把前罩 注射模 结构设计 |
Design of Injection Mold for the Cover Handle of Motorcycle |
| |
| Abstract: | For the cover handle of motorcycle, Analysis the structure and technological requirements of the plastic parts, Introduces in detail the mold type face plan design, mold structure design, mold casting system design, which could provide reference for the designs of similar injection mold parts. |
| |
| Keywords: | the cover handle of motorcycle injection mold mechanism design |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
