| 基于Matlab/Simulink的汽车ABS系统的建模与仿真 |
| |
| 引用本文： | 吴,玲,孙,宇,孙永荣.基于Matlab/Simulink的汽车ABS系统的建模与仿真[J].自动化应用,2014(5):75-77,80. |
| |
| 作者姓名： | 吴 玲 孙 宇 孙永荣 |
| |
| 作者单位： | [1]南京航空航天大学金城学院自动化系,南京211156; [2]南京航空航天大学自动化学院导航研究中心,南京210016 |
| |
| 摘 要： | 以单轮车辆为研究对象,在Matlab/Simulink的环境下建立整车数学模型、双线性轮胎模型、液压制动系统模型和滑移率计算模型,设计PID控制器,对所建立的汽车ABS数学模型进行仿真研究,得出仿真曲线,并将仿真结果与无ABS作用时的制动结果进行对比.结果表明,建立的ABS数学模型可靠,能达到较为理想的制动效果.
|
| 关 键 词： | ABS 防抱死制动系统 PID控制 建模 仿真 |
Modeling and Simulation of ABS System of Automobiles Based on Matlab/Simulink |
| |
| Affiliation: | WU Ling, SUN Yu, SUN Yong-rong (1 .College of Jin Cheng, Nanjing University of Aeronautics ＆ Astronautics, Nanjing 211156; 2. College of Automation, Nanjing University of Aeronautics ＆ Astronautics, Nanjing 210016) |
| |
| Abstract: | The single wheel vehicle model was adopted as a research object in the paper. Mathematical models for an en- tire car, a bilinear tire model, a hydraulic brake model and a slip ratio calculation model were established in the Mat- lab/Simulink environment. The PID controller was designed. The established ABS mathematical model was simulated and re- searched and the simulation curves were obtained. The simulation results were compared with the results without ABS. The re- sults show that established models were reliable and could achieve desirable brake control effects. |
| |
| Keywords: | ABS Anti-lock Braking System PID control modeling simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
