| Abstract: | Wood flour (WF)–polycaprolactone (PCL) and polybutylenesuccinate–butylenecarbonate (PBSC) composites were prepared by knead processing. The effects of a compatibilizer on the tensile and thermal flow properties of the composites were investigated. PCL‐graft‐maleic anhydride (PCL‐g‐MA) was used as a compatibilizer. Tensile properties were improved by adding PCL‐g‐MA to both composites. The tensile strength and Young's modulus were increased from 13 to 27 MPa and 581 to 1011 MPa in WF–PCL (50/50, w/w) composites, respectively, and from 17 to 28 MPa and 814 to 1007 Mpa in WF–PBSC (50/50, w/w) composites, respectively, with the addition of 5% PCL‐g‐MA. Elongation at break increased from 4 to 7% and from 3 to 6% in the WF–PCL and the WF–PBSC composites, respectively. Tensile strength was further increased with increasing WF content in the presence of PCL‐g‐MA. Thermal flow temperature and melt viscosity of the composites were increased, and water absorption and thickness swelling were improved with the addition of PCL‐g‐MA. It was found from the burial test that all composites were more than 40% degraded within 6 weeks, and there was no considerable difference in degradation between composites with PCL‐g‐MA and those without. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1900–1905, 2003 |
