| 基于均匀设计的水下金刚石绳锯磨削力研究 |
| |
| 引用本文： | 郭黎滨,崔海,王立权,孟庆鑫.基于均匀设计的水下金刚石绳锯磨削力研究[J].哈尔滨工程大学学报,2007,28(8):920-923. |
| |
| 作者姓名： | 郭黎滨 崔海 王立权 孟庆鑫 |
| |
| 作者单位： | 哈尔滨工程大学,机电工程学院,黑龙江,哈尔滨,150001 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 为了实现海底石油管道维修,采用均匀设计方法对水下金刚石绳锯柔性、断续磨削的磨削力进行了试验研究.使用MINITAB软件,建立了主要工艺参数对磨削力的多元线性回归方程,进行了回归分析,求得了绳锯磨削力较为精确的经验公式.进一步探讨了水下金刚石绳锯磨削力工艺规律,为保证绳锯良好的磨削性能和绳锯机参数设计提供了理论依据.
|
| 关 键 词： | 金刚石绳锯磨削力 均匀设计 回归分析 |
| 文章编号： | 1006-7043（2007）08-0920-04 |
| 修稿时间： | 2006-12-22 |
Research on grinding force of underwater diamond wire saw based on uniform design |
| |
| GUO Li-bin,CUI Hai,WANG Li-quan,MENG Qing-xin.Research on grinding force of underwater diamond wire saw based on uniform design[J].Journal of Harbin Engineering University,2007,28(8):920-923. |
| |
| Authors: | GUO Li-bin CUI Hai WANG Li-quan MENG Qing-xin |
| |
| Affiliation: | College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001 ,China |
| |
| Abstract: | It is important to know the flexibility and intermittent grinding forces of an underwater diamond wire saw when planning maintenance of a submarine oil pipeline. The uniform design approach was em- ployed to perform an experimental study. Using MINITAB software, multiple-variable linear regression equations of the grinding force were built in term of the main technical parameters. Regression analysis was done, and an accurate empirical formula of wire saw grinding force was established. Further exploration was undertaken of the technical laws of grinding forces of diamond wire saws, providing a theoretical basis for improving grinding performance through appropriate wire saw design parameters. |
| |
| Keywords: | grinding force of diamond wire saw uniform design regression analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
