| 电火花线切割机的抗电磁干扰设计 |
| |
| 引用本文： | 王连英,王秀,刘建春. 电火花线切割机的抗电磁干扰设计[J]. 电加工与模具, 2003, 0(6): 22-24 |
| |
| 作者姓名： | 王连英 王秀 刘建春 |
| |
| 作者单位： | 1. 江西现代职业技术学院,江西南昌,330029
2. 蓝天职业技术学院,江西南昌,330029 |
| |
| 摘 要： | 从电磁干扰信号的产生、耦合的途径出发，介绍了数控电火花线切割机抗电磁干扰设计的几种常用的思想和方法。
|
| 关 键 词： | 电火花线切割机 电磁干扰 耦合 数控切割 设计 |
| 修稿时间： | 2003-07-20 |
Design of resisting the interference by electromagnetic wave for WEDM machine tools |
| |
| Wang Lianying,et al.. Design of resisting the interference by electromagnetic wave for WEDM machine tools[J]. Electromachining & Mould, 2003, 0(6): 22-24 |
| |
| Authors: | Wang Lianying et al. |
| |
| Abstract: | From the way of the generation and the coupling of the interfering signal by electromagnetic wave, this paper introduces several common thoughts and methods on design of resisting the interference by electromagnetic wave for NC electrical-discharge WEDM machine tools. |
| |
| Keywords: | WEDM machine tools the interference by electromagnetic wave design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
