| 洗发水瓶盖注射模设计和工艺分析 |
| |
| 引用本文： | 康俊远,吴任和. 洗发水瓶盖注射模设计和工艺分析[J]. 塑性工程学报, 2007, 14(4): 147-150 |
| |
| 作者姓名： | 康俊远 吴任和 |
| |
| 作者单位： | 广东轻工职业技术学院,广州,510300 |
| |
| 摘 要： | 注射成型是重要的塑料成型方式,成型中工艺参数对塑件质量有重要影响。通过对洗发水瓶盖的工艺分析,确定零件的生产方案并设计了二次分型注射模具。在模具中设计了螺纹脱模机构、通过控制运动方向的特殊弧形侧抽芯机构、浇注系统、螺纹转动保险机构和温度控制系统的结构设计,对该注射模具的设计过程进行了全面的阐述。
|
| 关 键 词： | 注射模 塑料成型 脱模机构 保险机构 温度控制 |
| 文章编号： | 1007-2012（2007）04-0147-04 |
| 收稿时间： | 2006-06-09 |
| 修稿时间： | 2007-01-30 |
Design and analysis of the injection mould for shampoo lid |
| |
| KANG Jun-yuan,WU Ren-he. Design and analysis of the injection mould for shampoo lid[J]. Journal of Plasticity Engineering, 2007, 14(4): 147-150 |
| |
| Authors: | KANG Jun-yuan WU Ren-he |
| |
| Abstract: | Inject molding is an important way for plastic forming,and technological parameters have significant effect on the quality of injection molded parts.A processing plan and injection mould with two-step parting mechanism has been designed through the analysis of the technology of shampoo lid.Demoulding mechanism of thread and special arc side core-pulling mechanism with direction of motion controlled are used in the mold,the design process of its inject system,and protect mechanism of thread rotate and temperature control system make up,and the design procedure of the mould are described in detail. |
| |
| Keywords: | injection mould plastic forming demoulding mechanism protect mechanism temperature control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
