| 机械镀锌冲击介质的选择 |
| |
| 引用本文： | 王胜民,何明奕,刘丽,朱筱军.机械镀锌冲击介质的选择[J].电镀与涂饰,2006,25(3):23-25. |
| |
| 作者姓名： | 王胜民 何明奕 刘丽 朱筱军 |
| |
| 作者单位： | 昆明理工大学材料保护研究所,云南,昆明,650093;云南民族大学化学系,云南,昆明,650031 |
| |
| 摘 要： | 对比了不同种类冲击介质的物化特性,指出玻璃珠是机械镀锌冲击介质的最佳选择。分析了机械镀锌工艺对玻璃珠冲击介质的质量要求,包括成圆率、表面光洁度和耐磨性能;总结了机械镀锌生产中玻璃珠介质使用的注意事项,主要有避免玻璃珠的污染、选择适当的混珠和恰当的加入量。
|
| 关 键 词： | 机械镀锌 玻璃殊 冲击介质 |
| 文章编号： | 1004-227X（2006）03-0023-03 |
| 收稿时间： | 2005-06-07 |
| 修稿时间： | 2005-06-07 |
Choosing of impact media for mechanical plating |
| |
| WANG Sheng-min,HE Ming-yi,LIU Li,ZHU Xiao-jun.Choosing of impact media for mechanical plating[J].Electroplating & Finishing,2006,25(3):23-25. |
| |
| Authors: | WANG Sheng-min HE Ming-yi LIU Li ZHU Xiao-jun |
| |
| Abstract: | The performances of different impact media were compared. The results show that the glass bead is the best choice of impact media for mechanical plating. The quality requirements of glass beads in mechanical plating were analyzed, including circle forming ratio, surface roughness and wear resistance. The notices about the glass bead used in mechanical plating were summarized, such as avoiding the pollution of glass beads, choosing proper mixed glass beads and addition. |
| |
| Keywords: | mechanical plating glass bead impact media |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
