首页 | 本学科首页   官方微博 | 高级检索  
     

NRJ280B方型结晶器的研制
引用本文:高云喜,郭振明,孙学斌.NRJ280B方型结晶器的研制[J].大型铸锻件,2005(2):25-26.
作者姓名:高云喜  郭振明  孙学斌
作者单位:内蒙古北方重工业集团有限公司,内蒙古,014033;内蒙古北方重工业集团有限公司,内蒙古,014033;内蒙古北方重工业集团有限公司,内蒙古,014033
摘    要:对电渣重熔用的方形结晶器的图纸设计、成形工装及制造进行了研究,在结构上使铜内衬由原来的两条焊缝改成一道焊缝,使结晶器的使用寿命提高了近1/3。

关 键 词:电渣重熔  方形结晶器  纵焊缝
修稿时间:2005年1月28日

The Development of NRJ280B Square Mold
Gao Yunxi,Guo Zhenming,Sun Xuebin.The Development of NRJ280B Square Mold[J].Heavy Casting and Forging,2005(2):25-26.
Authors:Gao Yunxi  Guo Zhenming  Sun Xuebin
Abstract:This article has described the design, tool set up of forming and manufacturing for the square mold used for ESR, the improvement has been performed for its structure, in which one weld has been adopted to replace its original two welds inside the copper liner. So that the life time of the mold has been increased 30% more than the original ones.
Keywords:ESR  square mold  longitudinal weld
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号