首页 | 本学科首页   官方微博 | 高级检索  
     

退火温度对800MPa级热镀锌双相钢组织性能的影响
引用本文:徐刚,金光灿,赵征志,赵爱民.退火温度对800MPa级热镀锌双相钢组织性能的影响[J].物理测试,2009,27(2):22-25.
作者姓名:徐刚  金光灿  赵征志  赵爱民
作者单位:北京科技大学冶金工程研究院,北京,100083
摘    要:在实验室条件下试制800MPa级低硅热镀锌双相钢,研究了双相钢的双相处理工艺、组织和性能。实验结果表明:试样组织为铁素体+马氏体的双相组织,M的体积含量是15%-20%。通过三种不同的热处理温度获得了不同的F+M的比例,从而得到不同的力学性能。退火温度从780℃升到850℃,可以获得性能更好的双相钢。

关 键 词:连续退火  热镀锌  双相钢  组织  热处理

Effect of Annealing Temperature on Microstructure and Property of 800 MPa Grade Hot Galvanized Dual Phase Steels
XU Gang,JIN Guang-can,ZHAO Zheng-zhi,ZHAO Ai-min.Effect of Annealing Temperature on Microstructure and Property of 800 MPa Grade Hot Galvanized Dual Phase Steels[J].Physics Examination and Testing,2009,27(2):22-25.
Authors:XU Gang  JIN Guang-can  ZHAO Zheng-zhi  ZHAO Ai-min
Affiliation:(Research Institute of Metallurgy Engineering, University of Science and Technology Beijing, Beijing 100083, China)
Abstract:800 MPa grade low Si hot galvanized dual phase steels were piloted in laboratory, this paper investigates the technique of the (α+γ) intercritical heat treatment, microstructure and property of dual phase steels. The results of experiments indicated that the microstructure was comprised of ferrite and martensite, the volume fraction of martensite is 15%-20%. Three kinds of different heat-treatment temperature can obtain different proportion of F and M. When the annealing temperature increased from 780 ℃ to 850 ℃, high strength dual phase steels with excellent extensibility can be produced.
Keywords:continuous annealing  hot galvanized  dual phase steel  microstructure  heat-treatment
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号