|
|||||
|
|
| 基于Visual C++6.0的弧齿锥齿轮铣齿机交换挂轮智能选取系统的研究 | |
| 引用本文： | 苏建新,邓效忠,任小中,周厚荣.基于Visual C++6.0的弧齿锥齿轮铣齿机交换挂轮智能选取系统的研究[J].机械传动,2011,35(5):6-8. |
| 作者姓名： | 苏建新 邓效忠 任小中 周厚荣 |
| 作者单位： | 1. 西北工业大学机电学院,陕西西安,710072 2. 河南科技大学机电工程学院,河南洛阳,471003 3. 桂林冶金实业有限公司,广西桂林,541001 |
| 基金项目： | 国家自然科学基金资助项目(50575068) |
| 摘 要： | 针对传统的弧齿锥齿轮铣齿机挂轮选取计算精度差、效率低问题,从铣齿工作原理入手,分析了挂轮选取要求,研究了挂轮优化选取算法,并基于VC++6.0开发了智能挂轮选取软件,软件比传统计算方法精度、效率都较高.该方法同样适用于滚齿机和其他需要精确传动比的机床进行挂轮选取优化. |
| 关 键 词： | 弧齿锥齿轮 铣齿机 挂轮 智能选取 |
Study on the Intelligent System for Selecting the Change Gears of Spiral Gear Milling Machine based on Visual C++6.0 |
|
| Su Jianxin,Deng Xiaozhong,Ren Xiaozhong,Zhou Hourong.Study on the Intelligent System for Selecting the Change Gears of Spiral Gear Milling Machine based on Visual C++6.0[J].Journal of Mechanical Transmission,2011,35(5):6-8. | |
| Authors: | Su Jianxin Deng Xiaozhong Ren Xiaozhong Zhou Hourong |
| Affiliation: | Su Jianxin1 Deng Xiaozhong2 Ren Xiaozhong2 Zhou Hourong3(1 School of Mechanical Engineering,Northwestern Polytechnical University,Xi'an 710072,China)(2 School of Mechatronics Engineering,Henan University of Science and Technology,Luoyang 471003,China)(3 Guilin Metallurgical Machinery General Factory,Guilin 541001,China) |
| Abstract: | Aiming at the problems of low calculation accuracy and efficiency presenting in the selection of change gears of traditional spiral bevel gear milling machine,the demands of change gear selection are analyzed,and the optimal algorithm of selecting change gear is studied based on gear milling principle.An intelligent software of selecting change gear is developed based on VC++6.0.Both calculation accuracy and calculation efficiency of the software are higher than the traditional calculation.The method can al... |
| Keywords: | Spiral bevel gear milling machine Change gear Intelligence selection |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |