| 瓶盖模设计制造中几个问题的探讨 |
| |
| 引用本文： | 张永俊,刘晓宁. 瓶盖模设计制造中几个问题的探讨[J]. 模具工业, 2003, 0(7): 52-54 |
| |
| 作者姓名： | 张永俊 刘晓宁 |
| |
| 作者单位： | 广东工业大学,广东广州,510090 |
| |
| 摘 要： | 通过对瓶盖模设计和制造中几个关键零部件的实例分析 ,对模具结构设计和工艺的合理性进行了探讨 ,提出了正确的设计和制造方法 ,并通过实践证明了所提方法的可行性
|
| 关 键 词： | 瓶盖模 设计 制造 |
| 文章编号： | 1001-2168(2003)07-0052-03 |
| 修稿时间： | 2003-01-02 |
Study on Several Design and Manufacture Issue of Mould for Bottle Lid |
| |
| ZHANG Yong_jun,LIU Xiao_ning. Study on Several Design and Manufacture Issue of Mould for Bottle Lid[J]. Die & Mould Industry, 2003, 0(7): 52-54 |
| |
| Authors: | ZHANG Yong_jun LIU Xiao_ning |
| |
| Abstract: | On the basis of practical analysis of several key components in the design and manuˉfacture of the mould for bottle lid,the paper studied the rationality of the structure design and the processing property.Then it put forward a proper design and manufacturing ways,and proved out the feasibility through practical operation. |
| |
| Keywords: | mould for bottle lid design manufacture |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
