| 激光熔覆玻璃涂层 |
| |
| 引用本文： | 吴维Tao 王茂才.激光熔覆玻璃涂层[J].无机材料学报,1994,9(2):144-150. |
| |
| 作者姓名： | 吴维Tao 王茂才 |
| |
| 作者单位： | 中国科学院金属腐蚀与防护研究所腐蚀科学实验室 |
| |
| 摘 要： | 本文研究在Ａ３钢基材上激光熔覆玻璃涂层的可行性，激光熔覆玻璃涂层的过程是玻璃熔体在基材表面上湿润、铺展，然后冷凝的过程。玻璃熔体在基材表面上铺展，不仅与它们之间的浸润有关，而且与玻璃熔体的流动性有关。玻璃熔体的流动性在熔覆过程中随时间变化；激光处理参数的不同会改变熔体的随时间变化过程。合理选择激光参数能熔覆形成均匀的、光滑的、粘附的、无裂纹的玻璃涂层。在激光熔覆过程中，会在玻璃熔体中出现结晶现象，
|
| 关 键 词： | 激光熔覆 玻璃 涂层 |
Laser Cladding Glass Coating |
| |
| Wu Weitao,Wang Maocai,Yu Jiaqing.Laser Cladding Glass Coating[J].Journal of Inorganic Materials,1994,9(2):144-150. |
| |
| Authors: | Wu Weitao Wang Maocai Yu Jiaqing |
| |
| Abstract: | The feasibility of laser cladding glass coating on carbon steel substrate is investigated. Laser claddingglass coating exhibits the wetting of glass melt on substrate surface, the spreading of glass melt and therapid solidification; it greatly depends on the wattability of glass melt to substrate, glass melt's fluidityand its permitted spreading time. Based on the adequate choice of laser processing variables, thin,dense and crack-free glass coating can be obtained with excellent adhesion and good surfaCe integrity.'Crystallization occurs in glass melt, demonstrating the heterogeneous nucleation at substrate surfaCe andthe oriented growth of nuclei due to the directional heat conduCtivity; the formation of glass-ceramiccoating is possible. The present investigation idenifies laser power, travel speed and preheating as thekey variables that should be optimized. |
| |
| Keywords: | laser cladding glass coating preparation |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
