首页 | 本学科首页   官方微博 | 高级检索  
     

内配碳冷固球团-电炉冶炼工艺处理贫锰矿的试验研究
引用本文:李肇佳,赵强,万洪强.内配碳冷固球团-电炉冶炼工艺处理贫锰矿的试验研究[J].铁合金,2011,42(3):21-24.
作者姓名:李肇佳  赵强  万洪强
作者单位:长沙矿冶研究院,长沙,中国,410012
摘    要:针对贫锰矿石,采用内配碳冷固球团-电炉冶炼工艺流程,成功制取了合格的富锰渣。还原焙烧温度1000℃,还原时间45min,原矿粒度-1mm,还原剂用量1.6%,碱度0.3,冶炼温度1410℃,冶炼时间60min,在此条件下,渣相与金相熔分较好,渣相中Mn含量为32.58%,锰的回收率为92.16%;金相中Fe含量为94.40%,铁的回收率为95.32%,并通过验证试验得到证实。

关 键 词:内配碳  冷固球团  贫锰矿  电炉冶炼

A STUDY OF CARBON-BURDENED AND COLD-BONDED PELLETS-ELECTROSMELTING PROCESS DISPOSING LOW-GRADE MANGANESE
Li Zaojia,Zhao Qiang,Wan Hongqiang.A STUDY OF CARBON-BURDENED AND COLD-BONDED PELLETS-ELECTROSMELTING PROCESS DISPOSING LOW-GRADE MANGANESE[J].Ferro-alloys,2011,42(3):21-24.
Authors:Li Zaojia  Zhao Qiang  Wan Hongqiang
Affiliation:Li Zaojia Zhao Qiang Wan Hongqiang (Changsha Research Lnstitude of Mining and Metallurgy,Changsha 410012,China)
Abstract:The carbon-burdened and cold-bonded pellets-electrosmelting process is used to dispose low-grade manganese, and the qualified rich-manganese slag is obtained.Reduction roasting temperature was 1 000℃,reduction time was 45 min, particle-size was-1mm,reductant dosage was 1.6%,basicity was 0.3,smelting temperature was 1 410℃,smelting time was 60 min.On the condition,it had a good effect on the melting between slag and metallographic phase,the manganese content was 32.58%,manganese recovery was 92.16%in the slag;while the iron content was 94.40%,iron recovery was 95.32%in the metallographic phase.It was proved by the demonstration tests.
Keywords:with carbon in  cold-bonded pellets  low-grade manganese  electrosmelting  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号