| 基于虚拟技术的摆式飞剪剪切过程优化 |
| |
| 引用本文： | 张文峰,崔建昆,王飞. 基于虚拟技术的摆式飞剪剪切过程优化[J]. 机械工程师, 2007, 0(8): 43-45 |
| |
| 作者姓名： | 张文峰 崔建昆 王飞 |
| |
| 作者单位： | 上海理工大学,机械工程学院,上海,200093 |
| |
| 摘 要： | 应用虚拟样机技术,在ADAMS中建立了摆式飞剪机构优化设计的参数化模型,并通过ADAMS内置的DOT优化工具,采用序列线性规划法(SLP)对飞剪的剪切过程进行了运动学优化.优化后的飞剪机构满足剪切过程要求,同时提高了飞剪的剪切性能和轧件的剪切质量.
|
| 关 键 词： | 多杆机构 飞剪 ADAMS 序列线性规划法 虚拟技术 剪切质量 过程优化 Shear Type Pendulum Process Cutting Optimization 轧件 剪切性能 飞剪机构 运动学 剪切过程 序列线性规划法 优化工具 模型 参数化 机构优化设计 ADAMS |
| 文章编号： | 1002-2333（2007）08-0043-03 |
| 修稿时间： | 2007-05-25 |
Kinematics Optimization of Cutting Process of Pendulum Type Flying Shear |
| |
| ZHANG Wen-feng,CUI Jian-kun,WANG Fei. Kinematics Optimization of Cutting Process of Pendulum Type Flying Shear[J]. Mechanical Engineer, 2007, 0(8): 43-45 |
| |
| Authors: | ZHANG Wen-feng CUI Jian-kun WANG Fei |
| |
| Affiliation: | College of Mechanical Engineering, Shanghai University of Science and Technology, Shanghai 200093, China |
| |
| Abstract: | This article established the parametric model of flying shear for optimal design in ADAMS software environment through the use of virtual prototype technology, and optimized cutting process of flying shear by use of Sequential Linear Programming(SLP) which is linked in ADAMS with DOT(Design Optimization Tools). The optimized mechanism can satisfy the cutting process requirement, and enhance both the performance of flying shear and quality of workpieces. |
| |
| Keywords: | multi-bar flying shear ADAMS SLP |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
