增阻式一维弹道修正机构设计与气动特性分析 |
| |
引用本文: | 陈勇,吴国东,王志军,王平,刘霖. 增阻式一维弹道修正机构设计与气动特性分析[J]. 弹箭与制导学报, 2016, 0(2): 107-110. DOI: 10.15892/j.cnki.djzdxb.2016.02.026 |
| |
作者姓名: | 陈勇 吴国东 王志军 王平 刘霖 |
| |
作者单位: | 1. 中北大学机电工程学院,太原,030051;2. 77538部队,拉萨,850000;3. 豫西工业集团有限公司,河南南阳,473000 |
| |
基金项目: | 中北大学研究生科技基金(20151201) |
| |
摘 要: | 为提高一维弹道修正弹修正能力,提出并设计一种新型的一维弹道修正机构。以旋转稳定弹为研究平台,在美式M2A1型105 mm口径榴弹上加装阻力修正机构,利用Adams和Fluent仿真软件对修正机构工作过程进行数值仿真,初步验证了该机构设计的可行性。研究结果表明:机构展开前后阻力系数比为2.2左右,动作一致性好,展开过程迅速且稳定可靠,满足对一维弹道修正能力的要求。可为一维弹道修正机构的进一步设计和实际应用提供帮助。
|
关 键 词: | 一维弹道修正 阻力系数 气动特性 修正机构 |
The Design and Aerodynamic Characteristics Analysis on Resistance-increasing One-dimensional Trajectory Correction Mechanism |
| |
Abstract: | In order to improve correction capability of one-dimensional trajectory correction projectile , a new one-dimensional trajectory cor-rection device was proposed and designed .Taking spin-stabilized projectile as research platform , the 105 mm caliber grenade was fixed with resistance correction mechanism , Admas and Fluent were used to work out working process of the mechanism , feasibility of the mecha-nism design was verified .The results show that the resistance coefficient ratio can reach about 2.2 between before and after the mechanism works.It performs well in synchronization , reliably and speed, satisfying one-dimensional trajectory correction ability .The result is helpful for further design and practical application of one-dimensional trajectory correction mechanism . |
| |
Keywords: | one-dimensional trajectory correction drag coefficient aerodynamic characteristics correction mechanism |
本文献已被 万方数据 等数据库收录! |
|