| 五轴数控加工中心回转轴误差补偿技术的研究 |
| |
| 引用本文： | 岳中军,范晋伟,周顺生,董广谱. 五轴数控加工中心回转轴误差补偿技术的研究[J]. 机电产品开发与创新, 2005, 18(4): 108-109,114 |
| |
| 作者姓名： | 岳中军 范晋伟 周顺生 董广谱 |
| |
| 作者单位： | 北京工业大学,机电学院,北京,100022;北京工业大学,机电学院,北京,100022;北京工业大学,机电学院,北京,100022;北京工业大学,机电学院,北京,100022 |
| |
| 摘 要： | 针对五轴加工中心回转轴运动精度问题，基于多体系统理论，对回转轴运动拓扑结构进行描述．建立数控机床精密加工条件方位约束方程，研究了回转数控指令的迭代修正求解。在此基础上，利用C#语言编制误差补偿和仿真分析软件，通过试验检验，证明本文提出的补偿方法可使机床加工精度大大提高，为将来实际应用奠定了理论基础。
|
| 关 键 词： | 误差补偿 五轴数控加工中心 回转数控指令 |
| 文章编号： | 1002-6673（2005）04-108-03 |
| 收稿时间： | 2005-04-11 |
| 修稿时间： | 2005-04-11 |
Research on Rotary-axis Error Software Compensation Technology of Five-axis NC Machine Center |
| |
| YUE Zhong-Jun,FAN Jin-Wei,ZHOU Shun-Sheng,DONG Guang-Pu. Research on Rotary-axis Error Software Compensation Technology of Five-axis NC Machine Center[J]. Development & Innovation of Machinery & Electrical Products, 2005, 18(4): 108-109,114 |
| |
| Authors: | YUE Zhong-Jun FAN Jin-Wei ZHOU Shun-Sheng DONG Guang-Pu |
| |
| Abstract: | Focus on the circumgyrating accuracy of rotary axis, the topology structure of rotary axis has been described and pose restrict equation of rotary axis in moving has been derived out. The iterative calculation method for rotary NC instructions was studied in detail. Based on the above research work, the error compensation and simulation software were developed by using C#.Experiments show the theory is correct and prepares well ready for the practical appfication. |
| |
| Keywords: | Error compensation five-axis NC machine center rotary NC instruction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
