| 对刀设定工件坐标系的控制方法研究 |
| |
| 引用本文： | 黄启红. 对刀设定工件坐标系的控制方法研究[J]. 装备制造技术, 2010, 0(1): 162-163 |
| |
| 作者姓名： | 黄启红 |
| |
| 作者单位： | 岳阳职业技术学院,机电工程系,湖南,岳阳,414000 |
| |
| 摘 要： | 基于数控加工原理及数控编程与操作实践的经验,研究了数控加工中对刀设定工件坐标系的控制方法。
|
| 关 键 词： | 数控加工 工件坐标系 对刀 |
Research on the Controlling Method of Tools Setting Workpiece Coordinate System |
| |
| HUANG Qi-hong. Research on the Controlling Method of Tools Setting Workpiece Coordinate System[J]. , 2010, 0(1): 162-163 |
| |
| Authors: | HUANG Qi-hong |
| |
| Affiliation: | Dept.of Machine & Electrics Engineering;Yueyang Vocational Technical College;Yueyang Hunan 414000;China |
| |
| Abstract: | In this paper,based on the principle of NC process as well as CNC programming and operation of practical experience,the controlling method of tools setting workpiece coordinate system is researched in the NC process. |
| |
| Keywords: | NC process workpiece ordinate system tools setting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
