| 一种智能镍氢电池充电器的设计 |
| |
| 引用本文： | 覃海明,吴燕清,谢成梁. 一种智能镍氢电池充电器的设计[J]. 工矿自动化, 2011, 0(6): 11-13 |
| |
| 作者姓名： | 覃海明 吴燕清 谢成梁 |
| |
| 作者单位： | 中煤科工集团重庆研究院,重庆,400039 |
| |
| 基金项目： | “十一五”国家科技支撑计划资助项目(2007BAK23B03) |
| |
| 摘 要： | 针对基于MAX713的镍氢电池充电器只能用于1~16节镍氢电池的充电、而且存在虚充满现象的问题,提出了一种可为16节以上镍氢电源充电的智能镍氢电池充电器的设计方案。该充电器以MAX713为基础,采用级联方式连接电池,并增加了定时检测功能,该功能通过单片机控制继电器来确保镍氢电池完全充满。实际应用表明,该充电器具有一定的实用性。
|
| 关 键 词： | 镍氢电池 智能充电器 MAX713 |
Design of an Intelligent Charger of Ni-MH Batteries |
| |
| QIN Hai-ming,WU Yan-qing,XIE Cheng-liang. Design of an Intelligent Charger of Ni-MH Batteries[J]. Industry and Automation, 2011, 0(6): 11-13 |
| |
| Authors: | QIN Hai-ming WU Yan-qing XIE Cheng-liang |
| |
| Affiliation: | QIN Hai-ming,WU Yan-qing,XIE Cheng-liang(Chongqing Research Institute of China Coal Technology and Engineering Group Corporation,Chongqing 400039,China) |
| |
| Abstract: | In view of problems that charger of Ni-MH batteries based on MAX713 is only used in charging for 1~16 Ni-MH batteries and exists virtual filling,the paper proposed a design scheme of intelligent charger of Ni-MH batteries which can charge for more than 16 Ni-MH batteries.The charger takes MAX713 as basis and uses serial way to link batteries,and is added timing detection function which can ensure fully filling of Ni-MH batteries through controlling relay by single-chip microcomputer.The actual application s... |
| |
| Keywords: | Ni-MH battery intelligent charger MAX713 |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
