| 咖啡胶囊铝箔焊接设备设计与仿真 |
| |
| 引用本文： | 丁劲锋,徐晓佐,徐江.咖啡胶囊铝箔焊接设备设计与仿真[J].食品与机械,2020(12):105-110,177. |
| |
| 作者姓名： | 丁劲锋 徐晓佐 徐江 |
| |
| 作者单位： | 无锡太湖学院机电学院,江苏 无锡 214000;华中科技大学机械科学与工程学院仪器系,湖北 武汉 430074 |
| |
| 摘 要： | 为改善咖啡胶囊底部铝箔焊接质量,设计了基于槽型凸轮传动的咖啡胶囊铝箔焊接设备。对咖啡胶囊铝箔焊接设备的关键传动系统进行了详细设计,包括传动系统结构设计、槽型凸轮运动曲线计算、凸轮轨迹曲线推导等。在ADAMS中,建立铝箔焊接设备中关键传动系统模型,搭建仿真环境对设计的传动系统进行运动学分析。并对其中传动轴这一关键零部件进行刚柔耦合分析。通过仿真结果验证了铝箔焊接设备设计的可行性。
|
| 关 键 词： | 咖啡胶囊 铝箔焊接 结构设计 动力学仿真 刚柔耦合分析 |
Design and simulation of coffee capsule aluminum foil welding equipment |
| |
| DING Jing-feng,XU Xiao-zuo,XU Jiang.Design and simulation of coffee capsule aluminum foil welding equipment[J].Food and Machinery,2020(12):105-110,177. |
| |
| Authors: | DING Jing-feng XU Xiao-zuo XU Jiang |
| |
| Affiliation: | School of Mechanical and Electrical Engineering, Wuxi Taihu University, Wuxi, Jiangsu 214000 ,China;Department of Instruments School of Mechanical Science and Engineering, HuazhongUniversity of Science and Technology, Wuhan, Hubei 430074 , China |
| |
| Abstract: | In order to improve the welding quality of the aluminum foil at the bottom of the coffee capsule, a coffee capsule aluminum foil welding device based on a grooved cam drive was designed. The key transmission system of coffee capsule aluminum foil welding equipment was designed in detail, including the transmission system structure design, the calculation of groove cam motion curve, the derivation of convex contour curve, etc. In ADAMS, the key transmission system model in aluminum foil welding equipment was established, and a simulation environment was built to perform kinematic analysis on the designed transmission system. Rigid-flexible coupling analysis was carried out on the key component of the transmission shaft. The feasibility of the design of aluminum foil welding equipment was verified by simulation results. |
| |
| Keywords: | |
|
| 点击此处可从《食品与机械》浏览原始摘要信息 |
|
点击此处可从《食品与机械》下载全文 |
|
