| 钢中夹杂物检测及纳米相应用技术前景探索 |
| |
| 引用本文： | 方克明,尚德礼,王存. 钢中夹杂物检测及纳米相应用技术前景探索[J]. 鞍钢技术, 2012, 0(2): 1-4,14 |
| |
| 作者姓名： | 方克明 尚德礼 王存 |
| |
| 作者单位： | 1. 北京科技大学冶金与生态工程学院,北京,100083
2. 鞍钢股份有限公司技术中心,辽宁鞍山,114009 |
| |
| 摘 要： | 提出中国的钢铁工业要特别重视提高钢的质量,建议采用非水溶液电解法检测研究钢中夹杂物替代金相试样检测法,指出高温钢液中外加纳米粉可以改善钢的组织,控制钢中夹杂物,提高钢的性能,炼钢工艺还需要进一步优化。
|
| 关 键 词： | 钢质量 夹杂物 纳米相 工艺优化 |
Detection of Inclusions in Steel and Discuss on Application Prospect of Nano-phase Technologies |
| |
| Fang Keming , Shang Deli , Wang Cun. Detection of Inclusions in Steel and Discuss on Application Prospect of Nano-phase Technologies[J]. Aisc Techniques, 2012, 0(2): 1-4,14 |
| |
| Authors: | Fang Keming Shang Deli Wang Cun |
| |
| Affiliation: | 1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;2. Technology Center of Angang Steel Co., Ltd.; Anshan 114009, Liaoning, China ) |
| |
| Abstract: | It is proposed that improving the quality of steel should be particularly taken seriously by iron ＆ steel industry in China and the inclusions in steel should be detected by the method of electrolysis of non-aqueous solution substituting for metallographic examination. It is concluded that the microstructure in steel can be improved by adding nanometer powers to high temperature molten steel. However, in order to further control the inclusions in steel and improve the properties of the steel, steehnaking technology should be also further optimized. |
| |
| Keywords: | steel quality inclusions nano-phase technology optimizing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
