| 基于ADAMS的卸船机虚拟样机仿真分析 |
| |
| 引用本文： | 姚文庆,许海翔,刘华. 基于ADAMS的卸船机虚拟样机仿真分析[J]. 起重运输机械, 2012, 0(5): 4-10 |
| |
| 作者姓名： | 姚文庆 许海翔 刘华 |
| |
| 作者单位： | 上海市特种设备监督检验技术研究院 上海 200333 |
| |
| 基金项目： | 国家质检公益行业项目《起重机安全保护装置性能测试技术及装备研究》和《起重机械虚拟试验验证与安全评估技术研究》资助 |
| |
| 摘 要： | 基于MSC ADAMS软件及起重机设计规范,对卸船机工作过程进行了机械动力学仿真分析,详细叙述3个典型工况下关键构件及连接处受力情况,并根据受力复杂及变化情况找出需密切注意的构件.
|
| 关 键 词： | 卸船机 虚拟样机 机械动力学 |
ADAMS-based simulation analysis of virtual prototype for ship unloader |
| |
| Yao Wenqing,Xu Haixiang,Liu Hua. ADAMS-based simulation analysis of virtual prototype for ship unloader[J]. Hoisting and Conveying Machinery, 2012, 0(5): 4-10 |
| |
| Authors: | Yao Wenqing Xu Haixiang Liu Hua |
| |
| Affiliation: | Yao Wenqing,Xu Haixiang,Liu Hua |
| |
| Abstract: | Based on MSC ADAMS software and the standard of Crane Design Specification,this paper performs mechanical kinetics simulation analysis for the operation of ship unloader,describes the load carrying capacity of key components and joints in detail under three typical conditions and finds out the components which require special attention according to the complexity and change of load. |
| |
| Keywords: | ship unloader virtual prototype mechanical kinetics |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
