| X光掠入射平面反射镜系统的制备 |
| |
| 引用本文： | 胡家升,张景和,王宝林,孙可煦,马洪良,徐和平. X光掠入射平面反射镜系统的制备[J]. 中国激光, 1995, 22(4): 276-280 |
| |
| 作者姓名： | 胡家升 张景和 王宝林 孙可煦 马洪良 徐和平 |
| |
| 作者单位： | 中国科学院长春光机所，西南核物理与化学研究所 |
| |
| 摘 要： | 在论述Ｘ光掠入射平面反射镜工作原理的基础上，重点讨论了超高精度Ｘ光镍平面反射镜的制备过程，研制出表面粗糙度小于１．５ｎｍ的平面反射镜。测试和使用表明：在掠入射角为５°时，该反射镜的反射率在５４％以上。
|
| 关 键 词： | 平面反射镜，反射镜制备 |
| 收稿时间： | 1994-04-19 |
Manufacturing Technology of an X-ray Grazing Mirror System |
| |
| Hu Jiasheng, Zhang Jinghe,Wang Baolin. Manufacturing Technology of an X-ray Grazing Mirror System[J]. Chinese Journal of Lasers, 1995, 22(4): 276-280 |
| |
| Authors: | Hu Jiasheng Zhang Jinghe Wang Baolin |
| |
| Abstract: | In this paper, the basic paper, the basic workin principle of an X-ray grazing mirror system is introduced. An emphasis is placed on the manufacturing technology of the super-highaccuracy mirror system. A Ni mirror system with less than 1.5 nm surface roughness has been made out. The reflectivity of the Ni mirror system is more than 54% at a 5°grazing angle. |
| |
| Keywords: | planar mirror manufacturing technology of mirrors |
| 本文献已被 CNKI 等数据库收录！ |
|
