| 过氧化物硫化体系对AEM/三元尼龙TPV性能的影响 |
| |
| 引用本文： | 汲长远,刘苏苏,邱桂学.过氧化物硫化体系对AEM/三元尼龙TPV性能的影响[J].世界橡胶工业,2014,41(10):4-9. |
| |
| 作者姓名： | 汲长远 刘苏苏 邱桂学 |
| |
| 作者单位： | 青岛科技大学橡塑材料与工程教育部重点实验室,山东青岛,266042 |
| |
| 摘 要： | 采用过氧化物F40和DCP两种类型的硫化体系,同比改变过氧化物硫化体系中助硫化剂和硫化剂的用量,探究硫化剂添加量对AEM/PAM15动态硫化体系的影响。结果表明,随硫化剂添加量的增加,硫化程度先增加后减小;F40与DCP相比,对材料的性能影响相似,但DCP硫化过程中伴有刺激性气味且速率过快;动态硫化后的TPV1]与硫化前相比,多了一个界面玻璃化温度,显示了两种基料良好的结合性能。
|
| 关 键 词： | 过氧化物F40 DCP 乙烯丙烯酸酯橡胶(AEM) 三元尼龙(PAM15) 动态硫化 |
Peroxide Curing System on AEM/Nylon PAM15 TPV Performance |
| |
| Ji Changyuan,Liu Susu,Qiu Guixue.Peroxide Curing System on AEM/Nylon PAM15 TPV Performance[J].World Rubber Industry,2014,41(10):4-9. |
| |
| Authors: | Ji Changyuan Liu Susu Qiu Guixue |
| |
| Affiliation: | (Key Laboratory of Rubber-Plastics, Ministry of Education, Qingdao University of Science ＆ Technology, Qingdao 266042, China) |
| |
| Abstract: | In this experiment, two types of peroxide vulcanization systems, F40 and DCP are used. We explore the effect of curing agent content on AEM/PAM15 TPV by changing the aid vulcanizing agent and curing agent in an amount. The results show that the degree of vulcanization first increases and then decreases with the increase in the amount of curing agent. Similar effects on materials happen colnparing the DCP with F40 ,but DCP produce irritating odor and the cure rate is too fast. TPV after dynamic vulcanization creates a new glass transition temperature, which shows good binding properties of the two materials. |
| |
| Keywords: | Peroxides F40 Crystallization DCP AEM Nylon PAMI5 Dynamic Vulcanization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
