| CNC铣床切削颤振的动态性能试验分析 |
| |
| 引用本文： | 李彦启,郭志全,刘明涛,朱征.CNC铣床切削颤振的动态性能试验分析[J].制造技术与机床,2011(2). |
| |
| 作者姓名： | 李彦启 郭志全 刘明涛 朱征 |
| |
| 作者单位： | 天津科技大学机械学院,天津,300222 |
| |
| 基金项目： | 国家自然科学基金资助项目，天津科技大学自然科学基金资助项目 |
| |
| 摘 要： | 以一台大型数控内齿铣齿机为研究对象,结合切削颤振稳定性极限理论与动力学试验,测量机床刀具和工件间相对激振的频率响应曲线,并进行试验模态分析以及切削试验,得出机床振动的各个频率与振型.经对比,找出切削颤振的主振频率.
|
| 关 键 词： | 切削颤振 试验模态分析 动态性能试验 |
Dynamic Performance Experiments Analysis on Milling Vibration of CNC Milling Tool |
| |
| LI Yanqi,GUO Zhiquan,LIU Mingtao,ZHU Zheng.Dynamic Performance Experiments Analysis on Milling Vibration of CNC Milling Tool[J].Manufacturing Technology & Machine Tool,2011(2). |
| |
| Authors: | LI Yanqi GUO Zhiquan LIU Mingtao ZHU Zheng |
| |
| Affiliation: | LI Yanqi,GUO Zhiquan,LIU Mingtao,ZHU Zheng(College of Mechanical Engineering,Tianjin University of Science & Technology,Tianjin 300222,CHN) |
| |
| Abstract: | Based on a computer numerical controlled(CNC) machine tool,some dynamic experiments are done for finding out the main dynamic milling vibration.At first,the frequency response curve of relative vibration between cutter and workpiece is obtained from the cutting experiment.Then the experimental modal analysis and milling test are done to find out the mode shapes and frequency of the tool.From the contrast,the main frequency of milling vibration is found. |
| |
| Keywords: | Milling Vibration Modal Analysis Dynamic Performance Experiment |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
