首页 | 本学科首页   官方微博 | 高级检索  
     

多孔结构孔隙特征的分形研究
引用本文:刘阳,贾俊超,王磊.多孔结构孔隙特征的分形研究[J].平顶山工学院学报,2011,20(1).
作者姓名:刘阳  贾俊超  王磊
作者单位:1. 中国矿业大学力学与建筑工程学院,江苏,徐州,221008
2. 鄂尔多斯永煤矿业投资有限公司,内蒙古,鄂尔多斯,017000
摘    要:基于Menger海绵体分形模型和压汞实验原理提出了多孔结构体的孔隙体积分形维数、表面分形维数的算法,在此基础上推导了多孔结构比表面积的计算公式.研究发现,孔隙比表面积与孔隙率和孔隙的表面褶曲粗糙程度有关,孔隙比表面积需要用体积分维和表面分维两个独立变量表示.鉴于孔隙比表面积的测量比较困难,给出了表面分形维数的间接算法.

关 键 词:Menger模型  分形算法  压汞实验

Fractal research of porous structure characteristic
LIU Yang,JIA Jun-chao,WANG Lei.Fractal research of porous structure characteristic[J].Journal of Pingdingshan Institute of Technology,2011,20(1).
Authors:LIU Yang  JIA Jun-chao  WANG Lei
Affiliation:LIU Yang1,JIA Jun-chao2,WANG Lei1(1.China University Of Mining And Technology,Xuzhou 221008,China,2.Ordos Yongmei Mining Industry Company,Ordos 017000,China)
Abstract:Based on Menger cavernous fractal model and mercury injection experiment principle,this paper proposes algorithms of the pores' volume fractal dimension,surface fractal dimension of the porous structures,and deduced the calculating formula relating to the specific surface area.This research found that the specific surface area was related to the porosity ratio as well as pore surface's roughness;as a result,the specific surface area should be represented by two independent variables,namely the volumetric di...
Keywords:Menger model  fractal algorithm  mercury injection experiments  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号