| Abstract: | The evaluation of single‐fiber softness by bending is an ingenious and vital approach for the basic investigation of both the fiber bending properties and the textile softness. The bending behavior and bending modulus of wool, alpaca and silk fibers have been measured by an axial‐buckling method developed by the authors, which uses the fiber compression bending analyzer (FICBA). The bending properties of single fibers were quantified by calculating the equivalent bending modulus and the flexural rigidity by measuring the protruding length and diameter of fiber needles and the critical force, Pcr, obtained from the peak point of the force‐displacement curve. The measured data showed that the equivalent bending modulus of the alpaca fiber is higher than that of wool fiber, and even the rigidity is 10 times as high as wool, but its friction coefficient is lower than that of wool, which means that the soft handle of alpaca fabrics is mainly due to the smooth surface and low friction coefficient of alpaca fibers in contrast to that of wool fiber. For the silk fiber, despite high equivalent bending modulus, the smoother handle of silk should be mainly due to the thin fiber diameter in contrast to that of keratin fibers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 701–707, 2006 |
