| Abstract: | The cloud points of PPESK/NMP/H2O ternary system at different temperatures were measured by titrimetric method. The binodal lines in the ternary phase diagram of the poly(phthalazinone ether sulfone ketone (PPESK) dope system was determined, on the basis of the cloud point experimental data being linearly fitted with the semiempirical linear cloud point correlation. Furthermore, phase separation behavior during the phase inversion of PPESK membrane‐forming system was discussed in terms of the phase diagram. Then, dry–wet spinning technique was employed in manufacturing PPESK hollow fiber membranes by immersion precipitation method. The cross‐section morphologies of hollow fibers were observed by scanning electronic microscopy. Also, the effects of dope solution composition and spinning parameters, including the coagulant composition and the spinning temperature on the separation performances of fibers, were evaluated by permeability measurements. The thermotolerance of the PPESK hollow fiber membranes prepared in the work was examined for the permeation operation at different temperatures and pressure differences. The experimental results showed that pure water flux increases several fold along with the temperature increases from 20 to 80°C at different operation pressures, while the solute rejection only decreases slightly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 878–884, 2006 |
