| Q235B 薄板坯高温塑性的研究 |
| |
| 引用本文： | 孙彦辉,赵长亮,成小军,吴光亮,周春泉,蔡开科.Q235B 薄板坯高温塑性的研究[J].特殊钢,2006,27(2):28-30. |
| |
| 作者姓名： | 孙彦辉 赵长亮 成小军 吴光亮 周春泉 蔡开科 |
| |
| 作者单位： | 1. 北京科技大学冶金与生态工程学院，北京 100083;
2. 湖南华菱涟源钢铁有限公司，娄底 417009; |
| |
| 摘 要： | 根据Gleeble1500热/应变模拟试验机测试的CSP薄板坯连铸工艺生产的成分(%)为0.16~0.20C,0.020~0.060Alt Q235B钢的70 mm ×1 500 mm薄板坯600~1400℃热塑性曲线,得出连铸坯第Ⅲ脆性区为700~900℃,如在此温度范围矫直,铸坯易产生裂纹。通过扫描电镜分析断口形貌和电子探针的成分分析,得出形变诱导铁素体呈网状析出和奥氏体在低温区域析出氮化物(AlN)导致铸坯脆化。
|
| 关 键 词： | CSP工艺 Q235B钢 薄板坯 高温塑性 裂纹 |
| 收稿时间： | 09 20 2005 12:00AM |
| 修稿时间： | 2005-09-20 |
A Study on Hot Ductility of Q235B Steel Thin Slab |
| |
| Sun Yanhui,Zhao Changliang,Cheng Xiaojun,Wu Guangliang,Zhou Chunquan,Cai Kaike.A Study on Hot Ductility of Q235B Steel Thin Slab[J].Special Steel,2006,27(2):28-30. |
| |
| Authors: | Sun Yanhui Zhao Changliang Cheng Xiaojun Wu Guangliang Zhou Chunquan Cai Kaike |
| |
| Affiliation: | 1. School of Metallurgical and Ecological Engineering,University of Science and Technology,Beijing 100083;
2. Hunan Hualing Lianyuan Iron and Steel Corp, Loudi 417009; |
| |
| Abstract: | Based on the hot ductility curves at 600～1400 ℃ tested by Cleeble1500 thermal/strain simulation machine for 0.16~0.20C,0.020~0.060Alt,Q235B steel 70 mm x 1500 mm thin slab produced by compact strip production (CSP)process,the third brittle zone of cast slab was between 700~900 ℃.Therefore the crack of cast slab easily forms as straightening in this temperature range. With fracture morphology analysis by scanning electron microscope and composition analysis by electron probe micro analyzer, it is obtained that the deformation-induced ferrite network precipitation and AlN precipitated at lower temperature austenitic range lead to cast slab embritlement. |
| |
| Keywords: | CSP Process Q235B Steel Thin Slab Hot Ductility Crack |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
