| 喷射器湍流微观混合性能的计算流体力学模拟 |
| |
| 引用本文： | 林柯利,毕荣山,谭心舜. 喷射器湍流微观混合性能的计算流体力学模拟[J]. 化工进展, 2009, 28(5) |
| |
| 作者姓名： | 林柯利 毕荣山 谭心舜 |
| |
| 作者单位： | 青岛科技大学计算机与化工研究所,山东,青岛,266042;青岛科技大学计算机与化工研究所,山东,青岛,266042;青岛科技大学计算机与化工研究所,山东,青岛,266042 |
| |
| 摘 要： | 建立了喷射器湍流混合模型,利用商用流体力学软件Fluent6对不同结构的喷射器进行了模拟研究,从微观尺度考察喷射器的混合特性,得到了不同条件下喷射器完成湍流微观混合所需要的距离,并利用3个自定义的量纲为1数与雷诺数结合来描述喷射器的微观混合性能。结果显示,利用这些参数可以较好地表示喷射器的微观混合,并利用模拟结果回归了各准数之间的函数关系。
|
| 关 键 词： | 喷射器 湍流 混合 计算流体力学 |
CFD simulation of turbulent micro-mixing performance in ejectors |
| |
| DIN Keli,BI Rongshan,TAN Xinshun. CFD simulation of turbulent micro-mixing performance in ejectors[J]. Chemical Industry and Engineering Progress, 2009, 28(5) |
| |
| Authors: | DIN Keli BI Rongshan TAN Xinshun |
| |
| Affiliation: | Research Center for Computer and Chemical Engineering;Qingdao University of Science and Technology;Qingdao 266042;Shandong;China |
| |
| Abstract: | The turbulent mixing model was established for the research on micro-mixing characteristics in ejectors.Several ejectors of different configurations were studied by using the commercial CFD software Fluent 6,and the distances needed for finishing the micro-mixing under different conditions were obtained.Three user-defined dimensionless parameters and Reynolds number were used to describe the micro-mixing performance in ejectors.The results showed that the micro-mixing in ejectors could be described well by ... |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
